Header 'Alert-Info: bellcore-r2' is hardcoded, 

Distinctive ringing works in case the mentioned string was changed to in CallController.py:

"Alert-Info:;info=specified_ringtone"

"Alert-Info: <sip://127.0.0.1>\;info=specified_ringtone"

It is needed to enable on phone:

A calls <prefix>B   => B automatically answer

Header 'Alert-Info: bellcore-r2' is hardcoded,

 Distinctive ringing works  in case the mentioned string was changed to in CallController.py:

"Alert-Info:;info=specified_ringtone"

"Alert-Info: <sip://127.0.0.1>\;info=specified_ringtone"

It is needed to enable on phone:

A calls <prefix>B   => B automatically answer

Header 'Alert-Info:bellcore-r2' is hardcoded, 

Distinctive ringing works  in case the mentioned string was changed to in

CallController.py:

"Alert-Info:;info=specified_ringtone"

  or

"Alert-Info: <sip://127.0.0.1>\;info=specified_ringtone"

And "Matching Rule" should be specified on the phone WEB.

For example:
In CallController.py:
-----------
"Alert-Info:;info=ring2"
------------
On phone WEB:

Header ''Call-Info: =\\;answer-after=0" is hardcoded, featureworks  incase  stringwaschangedin CallController.py to:

Call-Info: <sip:11.22.33.44>;answer-after=0

or 

Call-Info: answer-after=0

Header 'Alert-Info:bellcore-r2' is hardcoded, 

Distinctiveringingworks incasethementionedstringwas

changed in CallController.py to:

"Alert-Info:;info=specified_ringtone"

  or

"Alert-Info: <sip://127.0.0.1>\;info=specified_ringtone"

And "Matching Rule" should be specified on the phone WEB.

For example:
In CallController.py:
-----------
"Alert-Info:;info=ring3"
------------
On phone WEB:

Header ''Call-Info: =\\;answer-after=0" is hardcoded, featureworks  incase  stringwaschangedin CallController.py to:

Call-Info: <sip:11.22.33.44>;answer-after=0

or 

Call-Info: answer-after=0

Header 'Alert-Info: bellcore-r2' is hardcoded, Distinctive ringing works 

in case the mentioned string was changed in CallController.py to:

"Alert-Info:;info=specified_ringtone"

  or

"Alert-Info: <sip://127.0.0.1>\;info=specified_ringtone"

And "Matching Rule" should be specified on the phone WEB.

For example:
In CallController.py:
-----------
"Alert-Info:;info=ring3"
------------
On phone WEB:

Header ''Call-Info: =\\;answer-after=0" is hardcoded, featureworks  incase  stringwaschangedin CallController.py to:

Call-Info: <sip:11.22.33.44>;answer-after=0

or 

Call-Info: answer-after=0

Header 'Alert-Info: bellcore-r2' is hardcoded, Distinctive ringing works 

n case the mentioned string was changed in CallController.py to:

"Alert-Info:;info=specified_ringtone"

  or

"Alert-Info: <sip://127.0.0.1>\;info=specified_ringtone"

And "Matching Rule" should be specified on the phone WEB.

For example:
In CallController.py:
-----------
"Alert-Info:;info=ring3"
------------
On phone WEB:

Header ''Call-Info: =\\;answer-after=0" is hardcoded, featureworks  incase  stringwaschangedin CallController.py to:

Call-Info: <sip:11.22.33.44>;answer-after=0

or 

Call-Info: answer-after=0

On system Admin WI:

• Enable "Ext-to-Ext Call Distinctive Ring"

On the phone WI:

• Account → Call Settings → Match Incoming Caller ID → set Matching Rule to "bellcore-r2":

On system Admin WI:

• Enable "Paging/Intercom" feature
• Assign to the Customer Dialing Rules with Paging/Intercom Prefix set on Service Codes tab (*33 is default one)

On the phone WI:

• Account→ Intercom Settings→ set "Yes" to "Allow Auto Answer by Call-Info/Alert-Info"

On system Admin WI:

• Enable "Ext-to-Ext Call Distinctive Ring"

On the phone WI:

• Account → Call Settings → Match Incoming Caller ID → set Matching Rule to "bellcore-r2":

On system Admin WI:

• Enable "Paging/Intercom" feature
• Assign to the Customer Dialing Rules with Paging/Intercom Prefix set on Service Codes tab (*33 is default one)

On the phone WI:

• Account→ Intercom Settings→ set "Yes" to "Allow Auto Answer by Call-Info/Alert-Info"

According to the specification of the device, the functionality is supported and corresponding parameters for configuration "Pick up via BLF" is present, but it doesn't work by pressing "BLF" button configured using "Programmable Keys" settings. Seems the issue with the firmware (pick up prefix isn't added when the button is pressed).

On system Admin WI:

• Enable "Ext-to-Ext Call Distinctive Ring"

On the phone WI:

• Account → Call Settings → Match Incoming Caller ID → set Matching Rule to "bellcore-r2":

On system Admin WI:

• Enable "Paging/Intercom" feature
• Assign to the Customer Dialing Rules with Paging/Intercom Prefix set on Service Codes tab (*33 is default one)

On the phone WI:

• Account→ Intercom Settings→ set "Yes" to "Allow Auto Answer by Call-Info/Alert-Info"

According to the specification of the device, the functionality is supported and corresponding parameters for configuration "Pick up via BLF" is present, but it doesn't work by pressing "BLF" button configured using "Programmable Keys" settings. Seems the issue with the firmware (pick up prefix isn't added when the button is pressed).

On system Admin WI:

• Enable "Ext-to-Ext Call Distinctive Ring"

On the phone WI:

• Account → Call Settings → Match Incoming Caller ID → set Matching Rule to "bellcore-r2":

On system Admin WI:

• Enable "Paging/Intercom" feature
• Assign to the Customer Dialing Rules with Paging/Intercom Prefix set on Service Codes tab (*33 is default one)

On the phone WI:

• Account→ Intercom Settings→ set "Yes" to "Allow Auto Answer by Call-Info/Alert-Info"

On system Admin WI:

• Enable "Ext-to-Ext Call Distinctive Ring"

On the phone WI:

• Account → Call Settings → Match Incoming Caller ID → set Matching Rule to "bellcore-r2":

On system Admin WI:

• Enable "Paging/Intercom" feature
• Assign to the Customer Dialing Rules with Paging/Intercom Prefix set on Service Codes tab (*33 is default one)

On the phone WI:

• Account→ Call Settings→ set "Yes" to "Allow Auto Answer by Call-Info"

On system Admin WI:

• Enable "Ext-to-Ext Call Distinctive Ring"

On the phone WI:

• Account → Call Settings → Match Incoming Caller ID → set Matching Rule to "bellcore-r2":

On system Admin WI:

• Enable "Paging/Intercom" feature
• Assign to the Customer Dialing Rules with Paging/Intercom Prefix set on Service Codes tab (*33 is default one)

On the phone WI:

• Account→ Call Settings→ set "Yes" to "Allow Auto Answer by Call-Info"

On system Admin WI:

• Enable "Ext-to-Ext Call Distinctive Ring"

On the phone WI:

• Account → Call Settings → Match Incoming Caller ID → set Matching Rule to "bellcore-r2":

On system Admin WI:

• Enable "Paging/Intercom" feature
• Assign to the Customer Dialing Rules with Paging/Intercom Prefix set on Service Codes tab (*33 is default one)

On the phone WI:

• Account→ Intercom Settings→ set "Yes" to "Allow Auto Answer by Call-Info/Alert-Info"

On system Admin WI:

• Enable "Ext-to-Ext Call Distinctive Ring"

On the phone WI:

• Account → Call Settings → Match Incoming Caller ID → set Matching Rule to "bellcore-r2":

On system Admin WI:

• Enable "Paging/Intercom" feature
• Assign to the Customer Dialing Rules with Paging/Intercom Prefix set on Service Codes tab (*33 is default one)

On the phone WI:

• Account→ Intercom Settings→ set "Yes" to "Allow Auto Answer by Call-Info/Alert-Info"

There's a brand-specific feature for connected handsets only.

While there's an "Auto answer" option in settings, a time delay between the call arriving to the base and the handset ringing doesn't allow it to be used for general purpose intercom. During tests, such a call was always rejected by PortaSwitch due to the lack of an instant answer.

Only incoming SIP Messages can be delivered by PortaSwitch.

TP - Polycom VVX series provisioning via Add-On mart#8.Notes

Only incoming SIP Messages can be delivered by PortaSwitch.

TP - Polycom VVX series provisioning via Add-On mart#8.Notes

A calls <prefix>B   => B automatically answer

A calls <prefix>B   => B automatically answer

A calls <prefix>B   => B automatically answer

1) Tick Customer=>Service Configuration=> Incoming Calls=>

"Ext-to-Ext Call Distinctive Ring" on Admin WI;

2) In code  'Alert-Info: <sip:127.0.0.1>;info=bellcore-r2' ,

so "bellcore-r2" should be specified on phone: Settings=>Ring;

A calls <prefix>B   => B automatically answer

A calls <prefix>B   => B automatically answer

Old software profile doesn't include the option, however, if enabled manually:

 Account -> Advanced -> Shared Line

SLA would work.

1) Tick Customer=>Service Configuration=> Incoming Calls=>

"Ext-to-Ext Call Distinctive Ring" on Admin WI;

2) In code  'Alert-Info: <sip:127.0.0.1>;info=bellcore-r2' ,

so "bellcore-r2" should be specified on phone: Settings=>Ring;

A calls <prefix>B   => B automatically answer

1) Tick Customer=>Service Configuration=> Incoming Calls=>

"Ext-to-Ext Call Distinctive Ring" on Admin WI;

2) In code  'Alert-Info: <sip:127.0.0.1>;info=bellcore-r2' ,

so "bellcore-r2" should be specified on phone: Settings=>Ring;

A calls <prefix>B   => B automatically answer

1) Tick Customer=>Service Configuration=> Incoming Calls=>

"Ext-to-Ext Call Distinctive Ring" on Admin WI;

2) In code  'Alert-Info: <sip:127.0.0.1>;info=bellcore-r2' ,

so "bellcore-r2" should be specified on phone: Settings=>Ring;

1) Tick Customer=>Service Configuration=> Incoming Calls=>

"Ext-to-Ext Call Distinctive Ring" on Admin WI;

2) In code  'Alert-Info: <sip:127.0.0.1>;info=bellcore-r2' ,

so "bellcore-r2" should be specified on phone: Settings=>Ring;

A calls <prefix>B   => B automatically answer

1) Tick Customer=>Service Configuration=> Incoming Calls=>

"Ext-to-Ext Call Distinctive Ring" on Admin WI;

2) In code  'Alert-Info: <sip:127.0.0.1>;info=bellcore-r2' ,

so "bellcore-r2" should be specified on phone: Settings=>Ring;

A calls <prefix>B   => B automatically answer

1) Tick Customer=>Service Configuration=> Incoming Calls=>

"Ext-to-Ext Call Distinctive Ring" on Admin WI;

2) In code  'Alert-Info: <sip:127.0.0.1>;info=bellcore-r2' ,

so "bellcore-r2" should be specified on phone: Settings=>Ring;

A calls <prefix>B   => B automatically answer

The tested phone had a custom firmware (108.86.3.3) with a non-RFC-compatible header sent during AT.

B2BUA rejects invites with:
Call-Info: <action=transfer>

AT is still possible by calling the target and transferring the second call via BT button.

Upgrading to a general firmware version is not recommended as it may brick the device.

AT is a basic feature, and it should work on stock devices with x.x.0.x firmware.

Video calls work with a USB-connected webcam. However, video in conferences isn't supported by PortaSwitch.

For thisdevicePaging/Intercom is used to locate handsets and make an internal call to another handset.

For thisdevicePaging/Intercom is used to locate handsets and make an internal call to another handset.

SIP instructs called party but the party does not ring in a different way. The same actions work for 440HD,430HD

On the phone WI:

1. Voice Over IP->Services->Application Server Type set to Metaswitch (Generic Type does not work);
2. Voice Over IP->Signaling Protocols:
   Use SIP Proxy IP and Port for Registration=Disabled;
   Use SIP Registrar=Enabled;
   Registrar IP Address or Host Name=PortaSIP Cluster IP (VIP)
3. Personal Settings->Function Keys:
   Type=Speed Dial+BLF;
   Number=Phone number to monitor

Fails because of invalid "Replaces:" header info. Both "to-tag" header parameter and "from-tag" one are missing from "Replaces:" header info.

On the phone WI:

1. Voice Over IP->Services->Application Server Type set to Metaswitch (Generic Type does not work);
2. Voice Over IP->Signaling Protocols:
   Use SIP Proxy IP and Port for Registration=Disabled;
   Use SIP Registrar=Enabled;
   Registrar IP Address or Host Name=PortaSIP Cluster IP (VIP)
3. Personal Settings->Function Keys:
   Type=Speed Dial+BLF;
   Number=Phone number to monitor

Fails because of invalid "Replaces:" header info. Both "to-tag" header parameter and "from-tag" one are missing from "Replaces:" header info.

On system Admin WI:

• Enable "Ext-to-Ext Call Distinctive Ring"

On the phone WI:

• Setting → Features → Alert Ring → set Alert Ring Text to "bellcore-r2":

On system Admin WI:

• Enable "Paging/Intercom" feature
• Assign to the Customer Dialing Rules with Paging/Intercom Prefix set on Service Codes tab (*33 is default one)

On the phone WI:

• Account→ Advanced→ Enable "Allow Auto Answer By Call-Info"

On system Admin WI:

• Enable "Ext-to-Ext Call Distinctive Ring"

On the phone WI:

• Setting → Features → Alert Ring → set Alert Ring Text to "bellcore-r2":

On system Admin WI:

• Enable "Paging/Intercom" feature
• Assign to the Customer Dialing Rules with Paging/Intercom Prefix set on Service Codes tab (*33 is default one)

On the phone WI:

• Account→ Advanced→ Enable "Allow Auto Answer By Call-Info"

On system Admin WI:

• Enable "Ext-to-Ext Call Distinctive Ring"

On the phone WI:

• Setting → Features → Alert Ring → set Alert Ring Text to "bellcore-r2":

On system Admin WI:

• Enable "Paging/Intercom" feature
• Assign to the Customer Dialing Rules with Paging/Intercom Prefix set on Service Codes tab (*33 is default one)

On the phone WI:

• Account→ Advanced→ Enable "Allow Auto Answer By Call-Info"

On system Admin WI:

• Enable "Ext-to-Ext Call Distinctive Ring"

On the phone WI:

• Setting → Features → Alert Ring → set Alert Ring Text to "bellcore-r2":

On system Admin WI:

• Enable "Paging/Intercom" feature
• Assign to the Customer Dialing Rules with Paging/Intercom Prefix set on Service Codes tab (*33 is default one)

On the phone WI:

• Account→ Advanced→ Enable "Allow Auto Answer By Call-Info"

On system Admin WI:

• Enable "Ext-to-Ext Call Distinctive Ring"

On the phone WI:

• Setting → Features → Alert Ring → set Alert Ring Text to "bellcore-r2":

On system Admin WI:

• Enable "Paging/Intercom" feature
• Assign to the Customer Dialing Rules with Paging/Intercom Prefix set on Service Codes tab (*33 is default one)

On the phone WI:

• Account→ Advanced→ Enable "Allow Auto Answer By Call-Info"

On system Admin WI:

• Enable "Ext-to-Ext Call Distinctive Ring"

On the phone WI:

• Setting → Features → Alert Ring → set Alert Ring Text to "bellcore-r2":

On system Admin WI:

• Enable "Paging/Intercom" feature
• Assign to the Customer Dialing Rules with Paging/Intercom Prefix set on Service Codes tab (*33 is default one)

On the phone WI:

• Account→ Advanced→ Enable "Allow Auto Answer By Call-Info"

On system Admin WI:

• Enable "Ext-to-Ext Call Distinctive Ring"

On the phone WI:

• Phone setting → Audio → Alert Info Ring Settings → set Alert Info to "bellcore-r2":

On system Admin WI:

• Enable "Paging/Intercom" feature
• Assign to the Customer Dialing Rules with Paging/Intercom Prefix set on Service Codes tab (*33 is default one)

On the phone WI:

• Phone settings→ Features→ Enable Intercom

On system Admin WI:

• Enable "Ext-to-Ext Call Distinctive Ring"

On the phone WI:

• Phone setting → Audio → Alert Info Ring Settings → set Alert Info to "bellcore-r2":

On system Admin WI:

• Enable "Paging/Intercom" feature
• Assign to the Customer Dialing Rules with Paging/Intercom Prefix set on Service Codes tab (*33 is default one)

On the phone WI:

• Phone settings→ Features→ Enable Intercom

On system Admin WI:

• Enable "Ext-to-Ext Call Distinctive Ring"

On the phone WI:

• Phone setting → Media Settings → Alert Info Ring Settings → set Alert Info to "bellcore-r2":

On system Admin WI:

• Enable "Paging/Intercom" feature
• Assign to the Customer Dialing Rules with Paging/Intercom Prefix set on Service Codes tab (*33 is default one)

On the phone WI:

• Phone settings→ Features→ Intercom Settings→ Enable Intercom

On system Admin WI:

• Enable "Ext-to-Ext Call Distinctive Ring"

On the phone WI:

• Phone setting → Media Settings → Alert Info Ring Settings → set Alert Info to "bellcore-r2":

On system Admin WI:

• Enable "Paging/Intercom" feature
• Assign to the Customer Dialing Rules with Paging/Intercom Prefix set on Service Codes tab (*33 is default one)

On the phone WI:

• Phone settings→ Features→ Intercom Settings→ Enable Intercom

On system Admin WI:

• Enable "Ext-to-Ext Call Distinctive Ring"

On the phone:

• Phone setting → Tone → set Alert Info to "bellcore-r2":

Note: it is not possible to configure it on the phone WI with the current firmware

On system Admin WI:

• Enable "Paging/Intercom" feature
• Assign to the Customer Dialing Rules with Paging/Intercom Prefix set on Service Codes tab (*33 is default one)

On the phone WI:

• Phone → Feature→ Enable Intercom

For a video call should be configured "Video Settings".

On the phone WI:

• Phone →Media→ Video Settings→ set "Video Codec"